We were recently contacted by a gentleman who had a shower enclosure installed in a neighboring community (Santa Clara).The job went terribly wrong, and he needed some help. He was looking for advice about what to do about the poor glass fitting and bad caulking job done by the previous glass contractor. My advice to…
Hello, I’m trying to install tub shower door. When I put in the inside panel the bottom part touches the bottom bumper but on the top there is a two gap. I tried adjusting the rolling wheels but nothing workings. I’m thinking of either cutting the wall jamb on the side of the gap or…
Hi Chris, My 3 piece L shape frameless shower was installed about a month ago and the original installer had a bit of trouble lining up the top corner of the L in the two glass pieces that came together above garden tub ledge and 6″ wide piece on front. He also cut his hand…
Hi, Great blog. I am a homeowner with zero knowledge of showers. We are custom building our house and my architect wants to put in a curbless shower in our master bath. Glass, frameless with a hinged door (to swing in and out). The shower is not huge. My friend tells me curbless showers can…
To whom it may concern. Not sure about the protocol here but I will ask away… Please find attached a picture of the finished white carrera marble bathtub wall with an end view of the mosaic and ½” pencil tile that borders it. The pencil tile protrudes 3/8” from the finished tile wall. Obviously, there…
Hello, I’ve been reading the info on your website and wonder if I may ask a question. I would come to your shop but we live in Rochester, NY. We have a frameless shower door and the seal is coming loose. Can you recommend an adhesive so I can attach the seal? Thank You. Kind…
We recently completed a master bath remodel including a glass enclosed shower. At the topmost opening edge of the door, it is ever so slightly scraping against the stationary frame edge. In your experience, is this cause for concern or remediation? It was doing this from the start and isn’t getting worse. Thoughts? Thanks, Billie…
